Plug power back in and continue holding reset for a final . ⚠️ Important Precautions
If your R6300 (v1 or v2) is stuck with a blinking amber power light or is not assigning IP addresses, use these recovery paths: 1. The TFTP Command Method Netgear R6300 Firmware Recovery Utility
Keep holding reset and the power for another 30 seconds . Plug power back in and continue holding reset for a final
Do not turn off the router while the power LED is blinking amber, as this indicates the firmware is currently being written to the flash memory. Netgear R6300 Firmware Recovery Utility
Before using software tools, try a "30-30-30" reset to clear the NVRAM: Hold the reset button for while powered on.
Never attempt a recovery over Wi-Fi; it will almost certainly fail and cause further damage.