Part 2- Outdoor Zip -

Use ZIP Liquid Flash for complex joints, penetrations, and transitions between wall and foundation. 4. Quality Control & Inspection Checklist

If installing stucco, an additional water-resistive barrier (WRB) might be required, though the system itself is an approved WRB.

Tape all panel joints and seams with ZIP System tape, ensuring the panel is dry and clean. Part 2- Outdoor zip

) perpendicular to studs, staggering 4' vertical seams by at least 24". Leave a

Install panels with the moisture-resistant barrier facing outward. Orient long edges ( Use ZIP Liquid Flash for complex joints, penetrations,

No under-driven nails (prevents tape tearing) or overdriven nails (prevents structural issues).

-inch gap at all panel edge joints to allow for proper movement. Tape all panel joints and seams with ZIP

Crucial Step: Use a ZIP System Tape Roller (or J-roller) to apply pressure, ensuring a strong bond. The roller will leave an embossed "Z" pattern on the tape, indicating proper pressure.