0h7uvb2ip0p7trhfmuczk_source.mp4 May 2026

: Carefully stand the bookcase upright. Insert shelf supports at your preferred heights and slide in the shelves with the finished side facing outward.

: Crucial Step: Use the previously attached safety strap to secure the bookcase to the wall to prevent tipping.

: Attach the G panel with the unfinished side facing up. Secure it with four screws into the pre-drilled holes on the D1 and C1 panels, then insert four cam bolts into the inner pre-drilled holes on the back of the G panel. 0h7uvb2ip0p7trhfmuczk_source.mp4

The following guided assembly video demonstrates the full process for putting together this bookcase: This guide outlines the assembly steps for the Mainstays 5-Shelf Bookcase Go to product viewer dialog for this item.

: Lay the J and K back panels over the unit. Ensure they are evenly aligned before nailing them firmly into place. : Carefully stand the bookcase upright

: Attach the I1 panel and secure it using the cam locks.

: Attach the H1 panel with the unfinished side facing up. Insert two cam locks onto the cam bolts and join the bottom piece using the wooden dowels. Secure the unit with screws, then cover all cam locks and screws with the provided caps. Finishing Touches : Attach the G panel with the unfinished side facing up

: Prepare the B1 and F1 panels by inserting two wooden dowels into the edges of each. Join them by attaching the F1 panel to the side of the B1 panel with four pre-drilled holes using two screws.